U Burners,
Pipe Burners,
Fire Ring Burners,
Stainless Steel and Steel,
Pan Burners,
Trays Burners,
Propane Burners,
We are going to be posting pictures and pricing of out new burner line and here is a list of the burners:
6" ring stainless with center hub 304 stainless steel pipe
6" ring stainless with center hub stainless steel tubing
8" ring stainless with center hub 304 stainless steel pipe
8" ring steel with center hub pipe
8" ring stainless without center hub (centerless) 304 stainless steel pipe
8" ring steel without center hub (centerless) pipe
10" ring stainless with center hub 304 stainless steel pipe
10" ring steel with center hub pipe
10" ring stainless without center hub (centerless) 304 stainless steel pipe
10" ring steel without center hub (centerless) pipe
12" single ring steel tubing
12" double ring steel tubing
12" single ring stainless steel tubing
12" double ring stainless steel tubing
18" single ring steel tubing
18" double ring steel tubing
18" single ring stainless steel tubing
18" double ring stainless steel tubing
19" single ring stainless steel tubing
19" double ring stainless steel tubing
22" single ring stainless steel tubing
22" double ring stainless steel tubing
24" single ring stainless steel tubing
24" double ring stainless steel tubing
Half Rounds
24" double stainless steel tubing
24" triple stainless steel tubing
24" double stainless steel pipe 304 stainless steel pipe
24" triple stainless steel pipe 304 stainless steel pipe
30" double ring steel tubing
30" double ring steel tubing
30" double ring steel tubing
30" double ring steel tubing
30" triple ring steel tubing
30" triple ring stainless steel tubing
36" double ring steel tubing
36" double ring stainless steel tubing
36" triple ring steel tubing
36" triple ring stainless steel tubing
36" double ring stainless steel 304 stainless steel pipe
36" triple ring stainless steel tubing 304 stainless steel pipe
Half Rounds
36" 1/2 round double ring stainless steel 304 stainless steel pipe
36" 1/2 round triple ring stainless steel 304 stainless steel pipe
48" double steel ring tubing
48" triple steel ring tubing
48" quad steel ring tubing
48" double stainless steel ring tubing
48" triple stainless steel ring tubing
48" quad stainless steel ring tubing
48" double stainless steel ring 304 stainless steel pipe
48" triple stainless steel ring 304 stainless steel pipe
48" quad stainless steel ring 304 stainless steel pipe
Half Rounds
48" 1/2 round triple ring stainless steel tubing
48" 1/2 round quad ring stainless steel tubing
48" 1/2 round triple ring stainless steel 304 stainless steel pipe
48" 1/2 round quad ring stainless steel 304 stainless steel pipe
Star Burners, 5 point in steel and stainless steel. Available in flat welded ends and crimped ends
12" steel crimped end
12" steel flat welded end
12" stainless steel crimped end
12" stainless steel flat welded end
18" steel crimped end
18" steel flat welded end
18" stainless steel crimped end
18" stainless steel flat welded end
24" steel crimped end
24" steel flat welded end
24" stainless steel crimped end
24" stainless steel flat welded end
These are our new propane burners for fire pits with use with PROPANE.
They are as follows:
18" pan with a 12" burner
24" pan with a 18" burner
30" pan with a 24" burner
The remote box has an electronic (battery) starter and a variable fuel valve. Propane must be mixed with air (air mixer valve/ venturi) to insure a clean bur without soot! If you burn straight propane you will experience black smoke/ soot and this is not good. We have worked on the development for several months now on these burners and they are now ready for you.
The picture on the lower left is of a possibility for the new burners. You can mount these into any table. With this in mind when we designed these we wanted the customer to be able to build or design any base, table or fire pit to install a propane burner.
The picture on the right is of the bottom side of the control box.
The left picture is of the control box with the air mixer. The picture on the right is of the ring and base plate which prevents the propane from sinking.
Below on the right are the thermo-coupler and electronic starter. The thermo-coupler is the safety switch which if the fire is blown out and leaving the thermo-coupler cold will shut your system off for safety reasons.
Here are the first pictures of our propane pan burners and more details will follow.
We will be posting on the new generation of propane pan burners.
These burners cone in 18", 24" and 30". When ordering please specify if the connector is on the left or right side.
with remote (optional) The pictures of the remote control will follow in the days to follow.
Our propane Fire Pit burners come in 2 sizes, 12" and 24".
This is a 24" ring on a 30" base. The base is detached for remote locating.
We are taking order for the burners as they are being built as ordered. Manufacturing time is about ten days and they ship the same day as of completed.
Here are a few pictures until we get situated:
24" U Burner
This is a double 24" u burner creating a 48" burner.
Just a 24" u burner
24 x 30 burner
24 x 24 burner
This is our tray burner which will be available in 18", 24" and 30" soon.
The pictures below are of a trapezoid pan burner with legs.
Here is a pan burner
Propane Burners air intakes:
When you are using propane you must have an air intake along with other safety devices.
We will be posting out new propane burners on line in the next few weeks as we find the time. Propane burners need a thermo coupler and a safety pilot light kit for safety reasons.
The pictures above and below are just showing the air intake and safety valves and other pictures will follow soon.
We will be posting our ring burners in steel and stainless steel.
This is a 120" burner.
We found a use for your replaced logs!
The custom fireplace below has a star burner and a very nice star opening
From the start......
to the finish
Very modern. The fireplace above has Gray, Gray Reflective, Black, and Black Reflective
The pan burner below is for a 2 sided fireplace and this pan is 25" x 45" and controlled from only one side. It is constructed from 16 gauge brushed stainless steel with 3" x 3" x 3" corner legs.
The picture on the bottom left shows you the thermo-coupler and safety pilot light kit which are UL and CSA approved.
This is one side of the two sided fireplace and we will post pictures when the glass is installed of both sides.
The fire pit below has a half round 4 piece stainless steel ring custom made to fit the shape of the fire pit.
Below is a 36" aluminum pan burner for propane with a 3" outside lip. These can be made to fit any fire pit, fire table of fire fit for natural gas or propane. We can build anything! This pan has a thermo-coupler for safety and air mixer built in to eliminate soot.
This is our latest venture and the first ones will be installed in a month or so. We will be posting pictures of the completed project. These are very futuristic Tiki Torches if that's what you would like to call them, enjoy.
This last one looks like Wilma Flintstone?
What we have done is create a vortex and added fire! These will be made available in all sizes, colors and shapes. Stay tuned for more installation pictures!
Ed
Our newest line of burners are the star burners available in 12", 18" 24" and 30" in stainless steel and steel
30" star
24" star
12" star
These are also made in custom sizes as well. If you dream it, we can make it! These can be made with a base or with out. The can be made for propane or natural gas.
The Sticks below are a pro-to type of 2 sets that are being installed in Nipomo California in the Trilogy project by Shea Homes (Pismo Beach). We will follow up with completed pictures as soon as we have time to post the finished project. There are several fireplaces which will also be all electronic ignition as well
At the base of each burner there is a control valve to regulate the flow of fuel to the burner. The base will be covered with our black sand to conceal the valves. We will post pictures of the finished and completed project.
Below is one of the two Fire Sticks we built in Nopomo, California at the Shea Homes Trilogy project. Each fireplace had an electronic ignition located on the side of the fireplace in a cabinet inset into the side of the fireplace.
The ventless burner below is 1 of 3 that were sent to Georgia. The glass that we tested was multi mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane ventless burner and these also are made in natural gas as well.
Notice the stainless box tray underneath the upper pan.
If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane ventless burner and these are available in natural gas as well.
The pictures below are of the same burner as above with Azurlite installed. These 4 ventless burners are being installed in Georgia.
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.
The burner below is installed in San Diego California. This is a 4 burner stainless steel custom. It is turned on by 4 valves and measures 72" across which is in an 84" fire pit. We will post pictures of the finished project when we finish it.
We will show you all four burners burning and we will also have the pictures and location for you of the finished project as soon as we can. As we have said before, there is nothing we can't do or build!
The fire pit below is what the burners above were installed in to:
The fire table below is at the Ivy Hotel downtown San Diego. There was an 8' fire pit installed there as well by one of our dealers on top of the Ivy Hotel. If your ever down to San Diego you must visit the Ivy Hotel. www.IvyHotel.com
Below are the pictures of our fire table and the new fire pit being installed on the 7th floor. Cesar did a great job!
The flat pan below has a propane burner installed for a fire pit. These are made in any size, shape or burn pattern. The one shown below is an electronic ignition control and these can be adapted with manual ignition as well. This was build for a designer in New York and placed on a shelf of the fireplace.
The pan burner below is a stainless steel/ propane pan for outdoors and we have installed an electronic ignition under the pan. These can also be made for natural gas.
The table below was built for Jim Shaw in Riverside California. The stainless steel tray with stainless steel burners was build to Jim's specs. We used bronze glass, bronze reflective glass and pink diamonds.This was a natural gas burner and could be easily converted to propane.
The fire pit below is a failed attempt of a propane conversion without our help in the beginning. You can't just burn propane! If you try this, this is what it will look like. You need to calibrate the amount of air to propane or it will back fire, burn black or explode! We recommend a thermo coupler, air mixer/ venturi along with several other important factors. We won't tell you who tried this but we will tell you we did fix the issue and now the customer is very happy. We did use azurlite with azurlite reflective.
The burner below has a 300,000 btu controller, 36" triple ring mounted on a 48" aluminum base plate for a fire pit in San Diego. These can be adapted for natural gas or propane with up to a 96" lead pilot light and igniter.
The bowls below are a newer product which we can help you convert your table you have now or build a table around the the bowl we provide you. We can build these for natural gas or propane. Filled with crushed lava rock and ready for what ever you would like to cover it with. We can spin bowls in any size. These come with steel or stainless steel rings, double or single rings. The bowl are very economical and are available up to 24". Anything over 24"will be a custom size, but we can make any size.
These bowls were set up for propane and as you can see the thermo coupler in the picture above.
The propane burner below was made to inset flush to the floor with a remote control underneath the pan. The pan sat 5" below the surface so the glass would appear to be just above the surface. The outer ring was bolted down to keep the glass from falling underneath the burner in the event you ever had to service the burner or remote control. The tower you see is actually for the air mixer to draft fresh air to the propane before it burns.
As you can see we drilled it to look like a ribbon burner. This is what was ordered by the customer.
The two pans below are stainless steel and are propane fueled with 415,000 btu electronic ignitions each.
24" 1/2 round triple stainless steel pipe 304 stainless steel pipe
The burner below is a propane manual valve with a pilot light. this burner is mounted on a 60" x 30" 1/2 round stainless steel plate which is not included as standard but an option.
The burner itself is a #304 stainless steel 1/2" pipe triple ring burner and can be used for propane or natural gas.
The twin ribbon burners below are 50" long each and powered be an electronic ignition. The will be installed in Santa Barbara California.As soon as the installation is complete we will post the finished pictures of the burners. They will be installed one in front of the other to create two walls of fire.
These we mock up shots with very low pressure in the shop and when they get installed you will be able to see the potential of these burners.
The ignition system that was powering these burners is a 110 volt 415,000 btu system. The control of the flame height can only be done manually as electronic control is not available as of yet for this unit.
The Zig Zag burner below was designed by the customer and it measures 6" x 18" and is made from stainless steel tubing. The burner can be used as a propane burner or a natural gas burner.
This is a 30" x 30" triple stainless steel Square burner made from #304 Stainless Steel. These can also be made from #316 Marine Grade Stainless Steel or even Mild Steel.
This ring is a 16" x 30" Single #304 Stainless Steel Oval. These can be made from #316 Marine grade Stainless Steel as well.
This is a 54" x 54" Single #304 Stainless Steel Triangle. These can be made from #316 Marine Grade Stainless as well or even Mild Steel. These can be made into doubles as well.
The fire pit below is in Marksville Louisiana and is at the Paragon Casino. The fire pit had an 18' fire ring installed in #304 stainless steel. The was done in and aluminum trough with 10 individual center feed burners. The gas line was a 1 1/2" and 5 lbs of pressure at 7" water column on natural gas. The ignition system is a Honeywell Infrared Flame Detection system. We will post more information on these larger fire features.
The big white ball is actually the Pearl of Louisiana.
Below is the fire ring in its trough surrounded by the water feature.
Below is one of the sections with the stainless steel burners. The complete feature is filled with water all around the fire ring.
This stainless steel burner was designed and built by one of our dealers, Todd Janssen in Orange County, California. If you dream it, we can build it! This was build for a custom shaped fire pit.
On this page we will be posting our new line of burners in different sizes and shapes. These will soon be available on the E Store as well.
The rings and shapes will be made in:
steel tubing,
stainless steel tubing,
steel pipe,
stainless steel pipe, #304 and #316 marine grade
rounds, with and with out centers,
singles, doubles, triples, quads and quints (5)
half rounds,
star burners, u burners, h burners and on and on. And if this is not enough we will custom build a burner to your specifications. Any and or all of these burners can and will be calibrated to burn propane or natural gas. (propane require special controls and calibration). Please note the difference in tubing and pipe, steel and stainless steel.
6" stainless steel with center hub in tubing.
This ring is also shown with 6" stainless steel ring burner with center hub made from 304 stainless steel pipe.
6" stainless steel pipe with center hub.
Also shown with an 8" stainless steel pipe with center hub.
8" stainless steel pipe with center hub.
Also shown with 8" steel pipe with center hub.
8" steel pipe with center hub.
Shown with 8" stainless steel pipe with no center.
8" stainless steel pipe with no center.
Also shown with 8" steel pipe with no center.
8" steel pipe with no center.
Shown with 10" stainless steel pipe with a center hub.
10" stainless steel pipe with center hub.
Shown with 10" steel with center hub.
10" steel pipe with center hub.
Shown with 10" stainless steel with no center hub.
10" stainless steel pipe with no center hub.
Shown with 10" steel pipe with no center hub.
10" steel pipe with no center hub.
Shown with 12" steel with no center hub.
12" steel pipe with no center hub.
Shown with 12" steel pipe with center hub.
12"' steel pipe with center hub.
Shown with 12" stainless steel with no center hub.
12" stainless steel pipe with no center hub.
Shown with 12" stainless steel pipe with center hub.
12" stainless steel pipe with center hub.
Shown with 12" double steel pipe with center hub.
12" single stainless steel tubing
12" double stainless steel tubing
12" double steel pipe with center hub.
Shown with 18" stainless steel pipe with center hub.
18" single stainless steel tubing
18" double stainless steel tubing
19" double steel tubing
19" double stainless steel tubing
22" double stainless steel tubing
18" single stainless steel pipe with center hub.
Shown with 18" double stainless steel pipe with center hub.
18" double stainless steel pipe
24" double stainless steel tube
24" triple stainless steel tube
24" 1/2 round double (24" x 12") stainless steel tube
24" 1/2 round (24" x 12") triple stainless steel pipe
30" double stainless steel tube
36" triple stainless steel tube
36" 1/2 round double (36" x 18") stainless steel #304 pipe
36" 1/2 round triple (36" x 18") stainless steel #304 pipe
48" 1/2 round double (48" x 24") stainless steel tube
48" 1/2 round (48" x 24") triple stainless steeel #304 pipe
48" 1/2 round (48" x 24") quad stainless steel #304 pipe
24" 1/2 round double (24" x 12") stainless steel pipe
24" 1/2 round triple (24" x 12") stainless steel pipe
30" double stainless steel ring pipe
30" triple stainless steel ring pipe
30" 1/2 round double (30" x 15") stainless steel pipe
30" 1/2 round triple (30" x 15") stainless steel pipe
36" double stainless steel ring pipe
36" triple stainless steel pipe
36" 1/2 round double (3" x 18") stainless steel pipe
36" 1/2 round triple (36" x 18") stainless steel pipe
48" 1/2 round triple (48" x 24") stainless steel pipe
48" 1/2 round quad (48" x 24") stainless steel pipe
12" star steel crimped pipe
12" star steel flat welded end pipe
12" star stainless steel crimped end pipe
12" star stainless steel flat welded end pipe
18" star steel flat welded end pipe
18" star steel crimped pipe
18" star stainless steel crimped pipe
18" star stainless steel flat welded end pipe
24" star steel crimped pipe
24" star steel flat welded end pipe
24" star stainless steel crimped pipe
24" star steinless steel flat welded end pipe
30" star stainless steel crimped pipe
30" star stainless steel flat welded end pipe
30" star steel crimped pipe
30" star steel flat welded end pipe
The ribbon burner below is made from 1/8" brushed stainless steel. The center was water jet cut and then we bent the two center fins down to install the ribbon burner with electronic ignition. The base plate measured 94" x 26" and was installed in San Diego, California. The architect is Kelly Crain of San Diego.
Hopefully we will be sent the finished pictures of the fireplace.
We can build these in any size, shape, material and in natural gas or propane.
This was tested in the shop with a minimal of 1/4 lb of natural gas. This burner is capable of at least an 18" ribbon burn. If you look in the center you will see the ignition head for the electronic ignition.
