Bronze base with Bronze Reflective and Gold on top
Bronze base with Bronze Reflective topped with Starfire
above and below
Bronze base with Bronze Reflective above
This is a typical fireplace before and below is our after
The 6 pictures below are of an antique coal basket using Bronze, Bronze Reflective and Starfire
The 6 pictures above are of an antique coal basket using Bronze, Bronze Reflective and Starfire
Fire pit below has:
Bronze base, 3/16 Amber, Bronze Reflective and Yellow Topper.
These next three are also one of our newest products found in the Surrounds section
The several pictures below are of a modern coal basket of stainless steel with legs or it can be suspended with chains. This will also be one of our new product lines available in several sizes and finishes.
The 2 pictures below have Bronze, Bronze Reflective, Black, Black Reflective and Pale Cobalt Blue Topper.
The 3 pictures below have Bronze, Bronze Reflective, Gray and Gray Reflective with the outside of the fireplace painted medium brown with fireplace paint.
The fireplace below has a Clear base with Bronze on top
The indoor fire table below has:
Bronze, Black, Emerald Green, Reflective Green, Black Reflective and Gold
The fireplace below has: Bronze and Bronze Reflective, Black and Black Reflective and Amber
The fireplace below has: Bronze and Reflective, Black and Reflective and Amber
The pictures below are of a self install with:
1/4" and 1/2" bronze, 1/4" and 1/2" starfire
red topping and about 1 lb of scarlet red topper.
The fireplace below has Bronze and Bronze Reflective installed.
The fire pit below is in Malibu, California which no one could figure out how to do what we did. The customer didn't want to see the fire pit hood anymore. So we just raised it. And everyone said it couldn't be done! This is what we like to do, take imagination and make it a reality. The base was provided by the customer we just supplied the "raise the hood" and the ring and Bronze and Bronze Reflective glass.
The vent went up 20 feet. E mail us and we will tell you how this was done.
The pictures below will show you how to install a propane burner and valve in your fire pit without drilling a hole in the side of your fire pit with our FPPK (fire pit propane kit). This was install in Calabasas, California with bronze and bronze reflective on top. The fire pit has 10" solid sides which made this a good candidate for the FPPK to be installed on the inside wall. This is a propane fire pit and we do calibrate every valve to every ring we install to eliminate back flow and any problems or issues that may happen. We also install the proper air mixer to insure a clean burn as we eliminate the soot know to be produced by propane. If you have a propane fire pit you know what I am talking about.
The fireplace below is a typical peninsula direct vent fireplace. A simple conversion. We used a bronze base with gold on top with Ice Ice Ice and Clear Diamonds and Pink Diamonds.
The fireplace below is a self install with a 2" base of crushed lava
painted with metallic warm brown paint
18x18 double burner
Bronze Base glass
Ice Ice Ice
Dark Red Orange Topper
The fireplace below has a base of Gray and Bronze topped with Bronze and Gray Reflective.
Click HERE or on the picture below to see all of the pictures of the Corten Steel Fire Pit!